CNC Tundish Upper Nozzle

Overview

Basic Info.

Model NO.	CNC
Outer	Al2O3
Workmanship	Casting
Transport Package	Wooden Case
Trademark	XIAZHIMU
Origin	China
HS Code	69029000
Production Capacity	50000ton/Year

Product Description

CNC tundish upper nozzle

Product Description

This product is suitable for continuous cast tundish open cast steel. The zirconium insert is made of high-purity zirconia, which is formed by high-pressure molding and sintering at high temperature. The outer is made of corundum and high-quality aluminum vanadium. It is formed by high pressure molding and baked at low temperature. The two are bonded with corundum mud, and the product's corrosion resistance and thermal shock stability have reached the domestic advanced level, which can fully meet the needs of various billet continuous casting. Tundish upper nozzle It is located within the tundish lining and conveys steel to the controlling exchangeable nozzle,which determines the steel flow. The stationary nozzle must be capable of withstanding long sequence times. Our Upper nozzle that incorporates a ultra-high densityLKZN-M or LKZN-H insert. The insert provides excellent erosion resistance and can provide extended casting sequence times. The lower surface of the stationary nozzle is ground to exacting tolerances to ensure maximum surface contact between the two nozzle components. Tundish lower nozzle It is located within an assembly that is fixed to the bottom of the tundish.The design of the exchangeable nozzle can vary according to the system manufacturer. We supplying a range of zirconia inserts and composite nozzle designs for the exchangeable metering of steel. Zirconia inserts can be supplied for on-site assembly into metallic holding blocks where cementing, grinding, size banding and on site drying are required prior to use. It was manufactured by both cast process of fine grained alumina method or presse process.
TUNDISH NOZZLE used for the continuous casting of steel.
Products used in Tundish can be offered to you as follow:Tundish metering nozzleNon swirling tundish nozzleTundish upper nozzleTundish lower nozzleTundish slide plateQuick-exchange tundish nozzleLadle shroudSubentry nozzle/ submerged entry nozzleMonoblock stopper

MNC tundish metering Nozzle changer
Features:
Highest safety in open casting process
Incresed yield of production with long sequence casting
Nozzle change or strand close less than one second
Quick start/stop of individual strand
Easy handling and operation results in a safe system operantion
Compact climenshions
Advanced mechanical system
Mechanical fixation of upper nozzle
Sliding drive arrangement-easy cylinder handling for nozzle change
Clear view to the nozzle & mold
Good access for nozzle tip cleaning
Spring well protected in housing against splashes and dirt

CNC TUNDISH NOZZLE
The CNC is the most user friendly and safe nozzle change device currently available for billet,bloom and beam casters.
Features;
Reduced tundish costs (refractory,manpower, energy)
Increased casting yield
Increase caster utilization
Improved operational safety
Refractory components:
Upper nozzle plate designed to avoid exposure to steel splashes
Refractory components available for open stream casting and alternative blank plate or double stroke.

Upper nozzle(Stationary nozzle)
It is located within the tundish lining and conveys steel to the controlling exchangeable nozzle,which determines the steel flow. The stationary nozzle must be capable of withstanding long sequence times.
Our Upper nozzle that incorporates a ultra-high densityLKZN-M or LKZN-H insert.The insert provides excellent erosion resistance and can provide extended casting sequence times.The lower surface of thestationary nozzle is ground to exacting tolerances to ensure maximum surface contact between the two nozzle components.
Lower Nozzle (EXCHANGABLE)
It is located within an assembly that is fixed to the bottom of the tundish.The design of the exchangeable nozzle can vary accordingto the system manufacturer.We supplying a range of zirconia inserts and composite nozzle designs for the exchangeable metering of steel.
Zirconia inserts can be supplied for on-site assembly into metallic holding blocks where cementing, grinding, size banding and on site drying are required prior to use.It was manufactured by both cast process of fine grained alumina method or presse process.Product Parameters

Outer: Al2O3
Al2O3	C	Apparent porosity	Bulk density	Compressive strength
(% minm)	(% minm)	(% max)	(gm./cc minm)	(MPa minm)
75	4	8	2.95	60
80	4	7	2.95	60
94	-	15	2.95	60

Zirconia Insert of Tundish Upper Nozzle
ZrO2+HFO2	Apparent porosity	Bulk density	C.C.S	Refractoriness
(% minm)	(% max)	(gm./cc minm)	(MPa minm)	(ºC minm)
65	23	3.60	80	1790
70	23	3.70	80	1790
80	23	3.90	80	1790
84	23	4.00	80	1790
93	21	4.50	100	1790
94	21	4.90	100	1790

Packaging & Shipping

International standard seaworthy exportable packing.1. Wooden case (Seaworthy standard packing)2. Further packing information based on customer's requirements

Application

The tundish metering nozzle is mainly used for continuous casting of tundish billets, blooms, rectangular billets, and small slabs for pouring steel.